In the transportation link of industrial production, the stable operation of nylon conveyor belt will directly affect production efficiency. However, slippage, as one of the common failures of nylon conveyor belt, often leads to equipment downtime, material loss and other losses. This article will continue to explain to you the remaining four causes and solutions that caused the nylon conveyor belt to slip.

Due to improper operation or heavy-duty shutdown, the belt conveyor carries excessive load during operation, which can cause the nylon conveyor belt to slip. The current of the belt conveyor and the electronic conveyor belt scale can be observed to control the amount of material and avoid heavy-duty downtime caused by overload and overload operation.

When the blanking pipe is clogged, it will cause a large amount of material to accumulate on the head and non-working surface, which will crush the nylon conveyor belt and cause slippage. Pay attention to observe the changes in the material on the nylon conveyor belt. When it becomes sticky, the frequency of inspection of the head blanking pipe should be increased, and the sticky material of the blanking pipe should be cleaned up in time to prevent clogging.

When the nylon conveyor belt is partially obstructed by a strong force, it will cause the belt conveyor to slip. For example, the head or tail of the belt conveyor has foreign objects stuck in the blanking pipe, and the tail reorientation drum does not turn, etc. will cause the belt conveyor to slip. If you want to solve it, you can strengthen the observation of the current of the belt conveyor, and immediately stop the belt conveyor for inspection when the current changes abnormally.

Usually the wrapping angle between the active wheel and the nylon conveyor belt should not be less than 120°, which is too small to cause slippage. The coefficient of friction between the active wheel and the conveyor belt is too small, which can also cause the conveyor belt to slip. If you want to solve it, you can modify the design when the wrapping angle between the active wheel and the conveyor belt is low and the position of the adjusting tensioner is still effectively increased. If the coefficient of friction is too small, carefully observe whether the surface of the main wheel of the conveyor is too smooth, or use a knurled structure or inlaid with a layer of rubber before testing.

The nylon conveyor belt produced by Liaoning Hengyi Rubber Machine Belt Manufacturing Co., Ltd. adopts a lightweight design as a whole, which is convenient for later installation and adjustment. The nylon fiber core layer in nylon conveyor belt gives the conveyor belt excellent tensile strength and wear resistance, allowing it to withstand high loads and long distances without breaking or wear. Most importantly, our nylon conveyor belt has uniform tension, which can effectively reduce and avoid slippage. Our company always puts the needs of customers first. In order to make product quality meet standards, we continue to invest in advanced testing equipment and strictly implement testing procedures. All products have been verified by sophisticated testing equipment, and the performance indicators meet international and industry requirements.