Partition conveyor belt can enable the continuous transportation of various bulk materials at any inclination angle of 0-90°. It has the characteristics of large conveying inclination, wide application range, small footprint, no transfer point, low maintenance costs, and large conveying capacity. It solves the conveying angle that cannot be achieved by ordinary conveyor belts or pattern conveyor belts, and can be used to transport powdery, granular, small bulk, paste and liquid materials that are easy to scatter.

Maintenance of partition conveyor belt:

1. Daily inspection of appearance and operating status: before starting up every day, it is best to carefully check the surface of the partition conveyor belt to see if there is any damage, scratches or cracks. Focus on checking the joint parts and the ribs and skirts on both sides to keep them intact and prevent material leakage. When the equipment is running, pay attention to whether there is deviation, abnormal noise or vibration. If a deviation is found, it should be adjusted in time. If there is abnormal noise or vibration, it needs to be stopped for inspection and troubleshooting.

2. Cleaning and maintenance: regularly clean up dust, oil and other impurities on the partition conveyor belt and keep it clean. You can wipe it with a brush or a soft cloth, and if necessary, you can use appropriate cleaning agents, but do not use corrosive chemicals to prevent damage to the partition conveyor belt.

3. Adjust the tension: the tension of the industrial partition conveyor belt should be moderate, not too loose or too tight. Too loose will cause the conveyor belt to slip, affecting the conveying efficiency. Too tight will increase the wear of the conveyor belt and shorten the service life. Therefore, it is necessary to check the tension regularly and adjust the tension according to the actual situation so that the industrial partition conveyor belt can operate stably at no load and full load.

4. Lubrication and maintenance: regularly lubricate the rollers, bearings and other components related to the industrial partition conveyor belt to reduce friction and wear and improve conveying efficiency. According to the requirements of the equipment manual, choose the appropriate lubricant and fill it with the appropriate amount of lubricating oil regularly.

5. Avoid overloaded operation: set the load in strict accordance with the specifications and carrying capacity of the industrial partition conveyor belt to prevent overloaded operation from causing excessive wear and even fracture of the conveyor belt, affecting production.

6. Waterproof and moisture-proof: industrial partition conveyor belt that works in a humid environment should take waterproof and moisture-proof measures, such as installing rain shields and adding drainage facilities, to prevent moisture intrusion and avoid aging and mold on the conveyor belt.

7. Correct storage: when the industrial partition conveyor belt is not in use, it should be placed in rolls and cannot be folded. It is best to flip every quarter during placement.

The industrial partition conveyor belt produced by Liaoning Hengyi Rubber Machine Belt Manufacturing Co., Ltd. has the advantages of long service life, large conveying angle, small footprint and wide application range. If you want to know more, please feel free to contact us, we look forward to your message!